The Ecological Future of our mobilities by Vincent Callebaut Architectures
![](http://archinews.archnmore.com/wp-content/uploads/2023/03/The-Ecological-Future-of-our-mobilities-by-Vincent-Callebaut-Architectures-01-NUsxQT-1024x1024.jpeg)
The mobility of the future will be more diverse, smarter, more shared, cleaner and greener.The fact that the transport sector is globally responsible for the largest share of CO2 emissions in the world, 24%, and that each motorist spends an average of 90 hours a year in traffic jams shows that things cannot continue like this. 52% of mobility in the world’s major cities is still done by car.
To develop a multimodal public transport offer, where shared use replaces ownership, our team of architects, assisted by AI, imagined 5 prototypes of soft and collective vehicles campaigning for peaceful and ecological mobility on land, in the air and on the water. Their common point: ergonomic architectures with a biomimetic design, dedicated to renewable energies (solar, biohydrogen, green micro-algae), and mixing biobased materials (cross laminated timber and engineered bamboo) with recycled materials (recycled aluminum and fiberglass).
PROTOTYPE 1 – eCAR
It is the end of heavy steel SUVs, giving way to wooden, agile, and autonomous city cars. The adoption by the European Parliament of the ban on the sale of thermal propulsion vehicles from 2035 poses many economic challenges and ecological issues.
Image © Vincent Callebaut Architectures
Image © Vincent Callebaut Architectures
Image © Vincent Callebaut Architectures
The objective is, by 2030, to reduce CO2 emissions by 55% compared to 1990, then to aim for climate neutrality in 2050, as provided for in the Green Plan for Europe (EU Green Plan). Both electric, solar, automated, and made mostly of engineered wood, as CLT or engineered bamboo, these prototypes and their sustainable life cycle could become the greenest concept cars yet to be adopted by the entire automobile industry.
PROTOTYPE 2 – eBIKE
Aerodynamic geometry, simplified transmission, integrated cockpits, axleless, hubless and spokeless wheels, the sport, road, mountain or city bikes are revolutionizing our daily lives! The bike is lighter with new hybrid structures, half in cross-laminated wood and half in graphene which has very good conductivity, conducive to incorporating even more artificial intelligence and connectivity.
Image © Vincent Callebaut Architectures
Image © Vincent Callebaut Architectures
Image © Vincent Callebaut Architectures
In town, bicycles free up traffic lanes, limit pollution, and they are shared in geolocated self-service. Pedaling remains a way to stay healthy, but also, for governments, to make a real public health policy, by reducing cardiovascular diseases and problems related to obesity.
Everyone on the bike!
PROTOTYPE 3 – eSHUTTLE
On the main axes, more and more lanes are gradually giving way to the installation of autonomous shuttles capable of interlocking and being able to be connected to each other, thus creating kinds of buses without drivers.The promise of the connected and autonomous shuttle, loaded with sensors and computerized, is safety, energy and time savings, tranquility, and entertainment.
Image © Vincent Callebaut Architectures
Image © Vincent Callebaut Architectures
Image © Vincent Callebaut Architectures
In the form of connected shuttles, the transport of tomorrow, a true hybridization between the individual car and the public transport, will be more ergonomic, open to the outside and specially equipped to accommodate a dozen travelers while respecting health rules. We imagine building hybrid shuttles from bio-based materials such as CLT, integrating renewable energies in the solar cowlings, as well as batteries capable of being recharged on dedicated dynamic induction routes.
PROTOTYPE 4 – eVTOL
Vertical take-off and landing (VTOL) aircraft is a variety of flying vehicle that uses electric or hydrogen power to hover, take off, and land vertically. Soon, the goal is to move beyond public transport, supporting many passengers, between 10 and 20 people, at fixed times on urban lines. The concept is to reduce travel times in the city or between cities, while reducing the pressure on public transport on the ground to alleviate road traffic.
Image © Vincent Callebaut Architectures
Image © Vincent Callebaut Architectures
Image © Vincent Callebaut Architectures
To ensure their energy autonomy and provide them with low-carbon modes of propulsion, hydrogen and electricity could be a solution by storing them in terminals. It is above all the take-off of a flying vehicle that is polluting. To be truly greener than a land vehicle and have a climate benefit, the flying bus must cover a relatively long distance and carry enough passengers. Another solution could also be to use them for freight and urban logistics.
PROTOTYPE 5 – HYDROFOIL
To increase the speed of boats and reduce their fuel consumption, hydrofoils boats help prevent loss of speed by removing friction and wave drag from the hull, raising it and keeping it in balance. The objective is to offer passengers peaceful navigation, without jolts above the waves, and to use the equivalent of 0.1 kWh of electricity per passenger/km to design ships that are more ecological than an electric bus.
Image © Vincent Callebaut Architectures
Image © Vincent Callebaut Architectures
Image © Vincent Callebaut Architectures
To relieve traffic congestion in coastal and river towns while reducing the carbon footprint of our travels, the challenge for architects today is to succeed in designing more rational electric flying boats. Self-sufficient boats and producing the energy they need daily via solar panels, wind turbines, and tidal turbines. Boats that consume less when sailing thanks to optimized hydrodynamic hulls and foils. Boats designed with biobased and/or recycled materials so that they can be completely deconstructed and recycled at the end of their life cycle. Source and images Courtesy of Vincent Callebaut Architectures.